Built for bigger miles and those seeking additional underfoot support, the Cairn Evo 3D PRO features an anatomically moulded 3D footbed with a refined toe triangle and supportive arch. Its firm, durable construction provides a stable foundation for long days on the trail, while the Vibram® Megagrip outsole delivers reliable traction in wet and slippery conditions. The footbed may require a short break-in period.
Features
- Anatomically Moulded 3D Footbed
- Supportive Arch
- Refined Toe-Triangle Design
- Secure G-Hook-and-Loop Strap System
- Three-Point Adjustment
- Whitewater-Ready Heel Strap
- Wet-Surface Traction
- Non-Marking Outsole
- Resoleable Construction
- Built for Long-Distance Use
- 1% for the Planet® Contribution
Specifications
| Product Type | Technical outdoor sandals |
| Product Name | Cairn Evo 3D PRO |
| Upper | Premium polyester and nylon webbing |
| Outsole | Vibram® Megagrip rubber compound, non-marking Slate Gray |
| Strap System | Bedrock patented Y-Strap three-point adjustment system with whitewater-grade Heel-Hook strap |
| Footbed | Firm, durable 3D moulded EVA foam |
| Stack Height | 16mm |
| Drop | Zero drop |
| Weight | 8.8 oz per sandal (size 9) |
| Resoleable | Yes |
| Manufacturing | US assembled of foreign parts |
Size Guide
| Bedrock Size | Sandal Length | Sandal Width |
|---|---|---|
| M5 / W6 | 24.0 cm | 8.7 cm |
| M6 / W7 | 24.9 cm | 9.2 cm |
| M7 / W8 | 25.7 cm | 9.5 cm |
| M8 / W9 | 26.6 cm | 9.8 cm |
| M9 / W10 | 27.4 cm | 10.3 cm |
| M10 / W11 | 28.3 cm | 10.6 cm |
| M11 / W12 | 29.2 cm | 11.1 cm |
| M12 / W13 | 30.2 cm | 11.4 cm |
| M13 / W14 | 31.2 cm | 11.6 cm |
| M14 / W15 | 32.2 cm | 11.9 cm |
Sizing Note: Bedrock sandals use unisex sizing. If you are between sizes, size up. When checking the printed outline, allow approximately 1 cm of space at the toe and heel.
Care Instructions
Cleaning
- Hand wash only. Do not machine wash, as the straps and hardware may be damaged.
- Use warm water with mild or eco-friendly dish soap and a brush to remove dirt, sweat and debris.
- Scrub the footbed thoroughly to remove accumulated dirt and oils.
- For clogged hook-and-loop sections, use a small wire brush or comb to remove debris.
Drying
- Air dry naturally in a shaded or well-ventilated area.
- Do not use a dryer, heater or other direct heat source.
- Avoid prolonged exposure to intense sunlight or excessive heat.
Strap & Hardware Care
- Use the side G-hook adjustment for regular on-and-off rather than repeatedly opening the hook-and-loop section.
- After ocean or saltwater use, rinse thoroughly with fresh water to help remove salt from the webbing and hardware.
Storage
- Store completely dry in a cool, dry place away from prolonged heat and direct sunlight.
Break-In Note
- The firm 3D moulded footbed is designed for durability and support and may require some break-in time before reaching its most comfortable feel.
Sustainability
- 1% for the Planet® — Bedrock donates 1% of each purchase to environmental non-profit organisations.
